Dave and I took off to Warren Performance Exhaust (WPE) in San Angelo to get the bung for the O2 sensor welded in. While there, I asked them to weld up some of the joints for the Pype stainless exhaust to eliminate some clamps, and install some permanent tailpipe hangers (I’d used the floppy universal hangers and tons of clamps when I originally installed the system). Dave and I took off to Corner Stop a few doors down for some awesome breakfast burritos and Migas while the work was being done. After we returned (about an hour later), the work was already done, and only cost $50! Sweet!
Took a quick ride over to Advance to get some paint for the Ram Air air cleaner and A/C idler pulley & bracket, then went back to the house. It was pretty ‘swampy’ as Dave liked to say [regarding the humidity, compared to Phoenix] so we just chilled and hung out for the rest of the day. Gonzo came by and hung out for a bit as well – had a good time shootin’ the sh!t and tellin’ stories.
I’ll get those things done one of these weekends when the temps come back down, the bugs go away, and there’s not some kind of car show or band thing going on. Stay tuned!